Printing board has good thermal insulation, fire prevention, sound absorption and other characteristics, can be used in household appliances, furniture, doors and windows, signs, outdoor decoration and so on. The problem of plate falling off is a common problem in the use process. What can we do to effectively prevent the plate from falling off, so as to reduce our loss? Small editor to share the following articles, I hope to help you.
1. The design of wall insulation system is reasonable. The wall insulation project is a systematic project. The matching parts of each structural layer should be considered in the design. For the materials with low strength or poor adhesion, anchor bolt reinforcement should be designed to improve the bonding rate.
2. The material selection and control of thermal insulation system should be done well, and the quality of polymer mortar, printing plate and anchor bolt in the external wall insulation system should be controlled. The adhesive should be scientifically proportioned to ensure the polymer content and matching additives. In addition, the quality of insulation board should be qualified.
3. Strengthen the construction control of printing board. As the weak link of quality control of building wall insulation engineering, the inspection and acceptance of base wall should be done before construction to ensure that the tensile bonding strength of base course meets the specification requirements, and the flatness of wall surface is within the controllable range.
The damage caused by falling off to the printing plate is relatively large, which not only makes the overall construction quality seriously threatened, but also affects people's personal safety. Therefore, we should pay more attention to it. Once the phenomenon of falling off is found, it is necessary to do the repair work in time, and the operation should be carried out by professional construction personnel, so as to prevent falling off again and affect people's personal safety After the normal use.
